Please select an Excel (.xls; .xlsx) or CSV file (.txt; .csv; .tab):
Reset shopping cart prior to importing:
The first line contains labels; ignore them:
Number of the column with the article number:
Number of the column with the quantity:
Separation characters (relevant for *.csv files):
Disclaimer
Before attempting to access a User's Manual on this website please read the following conditions. If you agree entirely with these conditions you may proceed to access the online manuals.
  • These online manuals are copyrighted by Mitutoyo Corporation (hereinafter referred to as our company).
  • No User's Manual accessible from this website may be reproduced, in part or in whole, or modified in any manner without the prior permission of our company.
  • The User's Manuals on this website are intended to be representative of those that are supplied with measuring tools such as micrometers and calipers currently available for sale, but this website does not provide all manuals for our current product lineup on the market. If any particular product manual cannot be found on this website please contact your dealer directly to arrange purchase of that manual.
  • The manuals released to this website may not be modified or updated each time the manuals are revised.
  • Printed materials, such as Operation Guides, that supplement a User's Manual may be supplied with a product. Please take note that these materials will not be released to this website.
  • Product appearance and specifications, as described in the User's Manuals, are subject to change and the production and distribution of any product may be discontinued without notice.
  • Service on this website is subject to discontinuation or change in contents or conditions without notice.
  • The User's Manuals on this website are online documents for customers who have purchased our company's products. Please take note that our company may not respond to inquiries from sources other than our customers.
  • Our company shall have neither liability nor responsibility to any person or entity with respect to any direct or indirect loss or damage (including damage due to data corruption, interruption of work, etc.) arising from use or nonuse of this website service even if our company has been previously notified of the occurrence of such loss or damage or the possibility of damage claim from a third party.
  • The safety precautions described in the User's Manuals are subject to change in accordance with any change in legal regulations.

Styli Cleaner

Item number: 63AAA102

stylicleaner_usage.eps
stylicleaner_usage.eps
styli_dirt.eps
styli_clean.eps

Styli Cleaner

Item number: 63AAA102

Price on application
Description
The integrated solution to clean your probe tip

Reliable? Avoid mismeasurement with the StyliCleaner

Put an end to the risk of wrong measuring data caused by a polluted stylus!

Mitutoyo Styli Cleaner The automated solution to remove dust or chip from coordinate measuring machines’ styli. The StyliCleaner automatically cleans your probe tip - even during the measurement process. In as little as 30 seconds a combination of compressed air and detergent reliably removes all dirt from the sensor. The StyliCleaner not only sets an end to the hassle of manual cleaning but also to the time-consuming recalibration of all probe angles that follows it. As a result, StyliCleaner dramatically increases the efficiency and reliability of your quality assurance!

Developed by a Mitutoyo application engineer together with one of his customers,  only with a prototype, has shown exceptional results from the beginning. Also, other customers did tests and were happily surprised by the results. Especially there were production measurements and SPC were involved. That’s why in every Metrology course it is mentioned: Clean the part, the fixture and the styli.
The integrated solution to clean your probe tip

Reliable? Avoid mismeasurement with the StyliCleaner

Put an end to the risk of wrong measuring data caused by a polluted stylus!

Mitutoyo Styli Cleaner The automated solution to remove dust or chip from coordinate measuring machines’ styli. The StyliCleaner automatically cleans your probe tip - even during the measurement process. In as little as 30 seconds a combination of compressed air and detergent reliably removes all dirt from the sensor. The StyliCleaner not only sets an end to the hassle of manual cleaning but also to the time-consuming recalibration of all probe angles that follows it. As a result, StyliCleaner dramatically increases the efficiency and reliability of your quality assurance!

Developed by a Mitutoyo application engineer together with one of his customers,  only with a prototype, has shown exceptional results from the beginning. Also, other customers did tests and were happily surprised by the results. Especially there were production measurements and SPC were involved. That’s why in every Metrology course it is mentioned: Clean the part, the fixture and the styli.
Model:
SC1
Remarks:
For straight styli only
xxMxRxLxMLx/xSWCx/xBx 
Product TypeThreadTip Material / Ø/Total LengthML/ML1Shaft material / ØDS/DS1Base material /Ø
01: Straight StylusM2R: Ruby Ballx length in mmx length in mmSWC: Wolfram CarbideBS: Stainless Steel
02: Cylinder StylusM3SiN: Silicon Nitride Ball/x in case of ML1SCER: CeramicsBAl: Aluminium 
03: Disc StylusM4Z: Zirconia BallSCFC: carbon fibre compositeBTi: Titanium 
04: Multi way stylusM5D: Diamond BallSS: Stainless steel
05: Ball Disc StylusDC: Diamond Coated BallSAl: Aluminium
06 : ExtensionRC: Ruby Cylinder
07 : AdapterCC: Carbide Cylinderx length in mmX diameter in mm
08 : Knuckle & CubeSC: Stainless Steel Cylinder/x in case of DS1
09: JointBDC: Ball Disc Ceramic
10-X: Holder  -X number
of receiver positions
DR:  Ruby Disc
11: Tool DS: Steel Disc
12: Accessory